Digital Glass Break Detector

Brako Dual Digital Glass Break Detector

Digital Glass break detector combined with shock detector
The Brako detects sounds of breaking glass
Brako Digital Glass Break Detector is compact size
The exclusive Brako Phased Frequency detection
Detects both shock signal and the strong signal of glass breakage
Detecting two signals approves “false alarm free” glass break detector
The Brako is not a window attached detector
The Brako provides volume protection for several windows
Allowing protection of several window items with one detector
Brako is the ultimate answer to false alarms free sensor
Used to protect Large windows, doors vitrine, vending machines, glass roofs
Easy and fast installation with glass break tester Brako TS
Supplied with Tamper switch
Fully Computerized Quality Control Testing
High Immunity to RFI, EMI and Environmental noises

Main Features
Dual Tech Combined Glass Break and Shock sensors
Brako is ASIC based digital electronics
Shock and/or breakage selectable
Analyzes two frequencies
Three LED indicators
Sensitivity adjustments
New ultra compact design
Installer-Friendly Installations
Ceiling or wall mounted
Optional tester, item Brako TS, provides easy and fast installation

Technical
Power Input: 9 – 16 Vdc
Current @ Standby: 15mA @ Active: 40mA at 12V
Detection Range according to glass type:
Plate glass – 10m (33ft) max
Tempered glass – 10m (33ft) max
Laminated glass – 8m (25ft) max
Wired – 8m (25ft) max
Coated – 8m (25ft) max
Double-pane – 8m (25ft) max
Diamond cut. – 3m (10ft) max
Glass Thickness 2.4 to 6.4mm (3/32 to 1/4″)
Mounting: Ceiling or Wall
Alarm Output Relay: N.C. 50mA/24V 27R in line resistor
Tamper Switch: N.C. 50mA, 24V, 10R in line resistor
Sensor: Electro condenser FET microphone
RFI Protection: 30V/m, 10 -1000 MHz
EMI Protection: 50,000V lightning electrical interference
Operating Humidity: 95% non condensing max relative humidity
Operating Temperature: -10 to +60ºC (+14 to +140ºF)
Dimensions: 78 x 51 x 21 mm (3.07 x 2.01 x 0.83“)