Electronic Relative Humidity controller
The TER_HA1 is a Digital Electronic Relative Humidity Controller
Electronic Relative Humidity controller with large Red LED display
Most used for humidity (RHT) alert for high or low levels
The TER_HA1 enclosed in small ABS case
Remote probe that placed in the measuring object
Humidity Control range is from 0 to 99%
Has configurable set point with minimum and maximum limits
Required for cannabis seeds growing farms
Used for agriculture laboratories and refrigerators
Applicable at seeds growing tents and similar industrial equipment
The upper and lower humidity limit alarm points are programmable
Programming via the front panel four keys
The TER_HA1 used in humidity alert applications maybe interfaced with
automatic dialer or cellular alert like the AV-4044GSM
The TER_HA1 supplied with remote metal humidity probe
Used as Hygrometer alert sensor
Humidity Controller with frame hardware for 70 x 28 mm panel mount
Main Features
Large and vivid display
Accuracy for RH 3% at 25ºC
Wide humidity range
Dry contacts Relay Insure great compatibility
Easy and Fast installation
Technical
Remote Sensor: RHT with 100 c”m (3.23 feet) cable
Processor: Micro controller
Operating Voltage: 9 to 16V DC
RF Immunity: From 50 KHz to 1 GHz @ 50V/m.
Current Draw Active: 22 mA
Current Draw Standby: 8 mA
Alarm relay: Dry contact
Alarm Contacts: 10A @ 24V DC, N.C. or N.O
Tamper Contacts: None
Humidity measurement range: 0 to 99%
Humidity measurement error: ± 3% at 25ºC
Remote Sensor Type: NTC (10K/3435) 100 cm wire (3.23 feet)
Accuracy: 1 deg C
Hysteresis: Adjustable delay start function
Limits: Upper and lower temperature limits are programmable
Opacity level: IP-30
Operating Temperature: -10 to +50ºC (+14 to +122ºF)
Dimensions: 75 x 35 and 82 mm deep (3.0 x 1.4 and 3.2“ deep)