HeatRo Welding & Heat detector

HeatRo Welding & Heat detector

HeatRo Welding & Heat detector used to protect steel locks and doors
Welding & Heat detector to protect locks & doors
Standard Adjusted heat detection at 58°C (136°F)
Semiconductor sensor for high stability
Interfacing to most alarm control panels
Optional Remote Heat sensor for locks welding detection (item HEAT_33)
Used to detect attempts to break in by removing locks with high heat
Applicable for temperature alert, heat rise inside communications
cabinets, electronic and electric distribution junction enclosures
Fits electric vehicles changing stations over heat alert
The HeatRo operates at 11-14 V DC
Low current consumption, only 20 mA at idle
DIP switch for setting delay & parameters
Enclosed in Black ABS compact box
Wire terminals for fast and simple wiring
Dry output for simple interfacing other devices
Only four wires for power and alerts

Main Features
Enclosed in ABS housing
High immunity to false alarms
Low Standby current consumption
Tamper protection
Separate sensitivity and enable/disable for each detection technology
Three Indication LEDs
Easy and fast installation

Technical
Heat sensor: Semiconductor (min. 75 °C, 167 ° F)
Processor: Digital ASIC
Applications: Indoor
Operating Voltage: 8.4 to 14V DC
Current: 25 mA @ standby, 50 mA alarm
Relay: N.C. mode, solid state, 50 mA @ 12V
RFI Protection: 30V/m @ 10–1000 MHz
EMI Protection: 50KV @ 1 mS lightning or surge
Tamper: Protects top cover removing
MTBF: 100,000 Hours
Detection: Heat rise
Indications: Two colored LEDs
Operating Temp: -25 to +60 C°(-13 to 140° F)
Humidity: 80%
Enclosure: ABS, Black color
Size: W=90, L=85, H=50 mm (3.55 x 3.35 x 2″)