Digital shock detector SEN_DIG
Mini digital shock detector
Mini digital shock detector for alarm systems
Detects vibration, sawing and shocks
Shock detector with none mechanical parts
Compact size mini digital shock detector
False alarm free shock and vibration detector
Applicable for metal grills, doors and windows protection
The Sen-Dig has been carefully engineered for simple, easy to operate
Reliable detection device, with minimum false alarms
Sensitivity trimmer and High – Low mode jumper
LED mode jumper
Covers about 2×2 meters area
Housed in ABS plastic enclosure
Mini digital shock detector
Mini digital shock detector for alarm systems
Detects vibration, sawing and shocks
Shock detector with none mechanical parts
Compact size mini digital shock detector
False alarm free shock and vibration detector
Applicable for metal grills, doors and windows protection
The Sen-Dig has been carefully engineered for simple, easy to operate
Reliable detection device, with minimum false alarms
Sensitivity trimmer and High – Low mode jumper
LED mode jumper
Covers about 2×2 meters area
Housed in ABS plastic enclosure
Tamper switch, relay output, sensitivity trimmer included
Fully Computerized Quality Control Testing
High Immunity to RFI, EMI and environmental noises
Main Features
ASIC based digital electronics
Analyzes shock level
Micro controller based
Sensitivity adjustments
New ultra compact design
Installer-Friendly Installations
Technical
Power Input: 9 – 16 Vdc
Current @ Standby: 15mA @ Active: 40mA at 12V
Detection Range: Approximately 2×2 meters
Mounting: Screws or strips
Alarm Output Relay: N.C. 100mA/12V 27R in line resistor
Tamper Switch: N.C. 200mA, 24V, 27R in line resistor
Sensor: Piezo
RFI Protection: 30V/m, 10 -1000MHz
EMI Protection: 50,000V lightning electrical interference
Operating Humidity: 95% non condensing max relative humidity
Operating Temperature: -10 to +60ºC (+14 to +140ºF)
Dimensions: 85 x 25 x 21 mm (3.34 x 1.01 x 0.83“)
