SesMo Pro IP-65 Triple Tech detector

SesMo Pro IP-65 Triple Tech detector SESMOPRO65

SesMo Pro IP-65 Triple Tech detector: Seismic, light and heat
detector incorporates three detection technologies
Detects Seismic (break and shock), light and heat
SesMo Pro IP-65 detector is an advanced outdoor seismic detector
Main used for under ground protection for high security sites
SesMo Pro IP-65 detector with three alarm relays at output
SesMo Pro IP-65 most used for outdoor protection
Used for outdoor walls, floors and ceilings break-in protection
SesMo Pro IP-65 used also for underground digging
Fits steps detection for yards and passes
Housed in sealed plastic enclosure with cable gland
12V operating power and relay output
With unique signal analyzing prevents false alarms
SesMo Pro IP-65 provides self test by remote command
ASIC Micro controller analyzes the detected signals
Alarm is activated as soon as one of the three sensors is activated

Main Features
Enclosed in sealed IP-65 clear cover enclosure
Concealed wires terminal
High immunity to false alarms
Low Standby current consumption only 25 mA
Tamper protection
Three Indication LEDs
Easy and fast installation

Technical
Seismic sensor: Bimorph
Heat sensor: Semiconductor (min. 75 °C, 167 ° F)
Light sensor: Opto Cell (min. 20 Lux)
Processor: Digital ASIC
Testing simulators: Two Seismic and light
Applications: Outdoor and Indoor
Operating Voltage: 11 to 14V DC
Current: 25 mA @ standby, 50 mA alarm
Relay: (3) N.C. mode, solid state, 50 mA @ 12V
RFI Protection: 30V/m @ 10–1000 MHz
EMI Protection: 50KV @ 1 mS lightning or surge
Tamper: Single Tamper Switch; case opening
MTBF: 20,000 Hours
Detection: Seismic, light and heat
Indications: Three colored LEDs
Operating Temp: -35º to +60º C (-31 to 140º F)
Humidity: Up to 90%
Enclosure: Plastic with cover at IP-65
Dimensions: L=192, W=87, H=61 mm (7.55 X 3.42 X 2.40″)