SesMo EXP-68 outdoor detector
SesMo EXP-68 outdoor detector
SesMo EXP-68 outdoor model is an advanced outdoor seismic
Enclosed in IP-68 metal housing with EMI & RFI shielding
Used for explosive sensitive applications, like fuel and gas storage sites
The SesMo EXP-68 outdoor detector incorporates 3 or 4 detection technologies
Detects: Seismic,Light and Heat. Optional: Removal sensor
Used for the protection of fuel and diesel facilities and other underground storage facilities
The SesMo EXP-68 outdoor detector is an advanced version designed for outdoor
By applying unique signal analyzing the SesMo prevents false alarms
SesMo replaces mechanical shock and vibration detectors which cause false alarms
The SesMo EXP-68 outdoor detector is a combination of three detectors plus optional opening sensor
ASIC Micro controller analyzes the detected signals
Alarm is activated as soon as one of the three sensors activated
Precise electronic filters prevent potential false alarms due to environmental disturbance
SesMo EXP-68 outdoor detector
SesMo EXP-68 outdoor model is an advanced outdoor seismic
Enclosed in IP-68 metal housing with EMI & RFI shielding
Used for explosive sensitive applications, like fuel and gas storage sites
The SesMo EXP-68 outdoor detector incorporates 3 or 4 detection technologies
Detects: Seismic,Light and Heat. Optional: Removal sensor
Used for the protection of fuel and diesel facilities and other underground storage facilities
The SesMo EXP-68 outdoor detector is an advanced version designed for outdoor
By applying unique signal analyzing the SesMo prevents false alarms
SesMo replaces mechanical shock and vibration detectors which cause false alarms
The SesMo EXP-68 outdoor detector is a combination of three detectors plus optional opening sensor
ASIC Micro controller analyzes the detected signals
Alarm is activated as soon as one of the three sensors activated
Precise electronic filters prevent potential false alarms due to environmental disturbance
Main Features
Enclosed in sealed IP-68 metal enclosure
Enclosure with special EMI & RFI shielding
Concealed wires terminal
High immunity to false alarms
Low Standby current consumption only 25 mA
Tamper protection
Separate sensitivity and enable/disable for each detection technology
Three Indication LEDs
Easy and fast installation
Technical
Seismic sensor: Bimorph
Heat sensor: Semiconductor (min. 75 °C, 167 ° F)
Light sensor: Opto Cell (min. 20 Lux)
Processor: Digital ASIC
Testing simulators: None
Applications: Indoor or Outdoor
Operating Voltage: 11 to 14V DC
Current: 25 mA @ standby, 50 mA alarm
Relay: (1) N.C. mode, solid state, 50 mA @ 12V
RFI Protection: 30V/m @ 10–1000 MHz
EMI Protection: 50KV @ 1 mS lightning or surge
Tamper: Single Tamper Switche; case opening
MTBF: 30,000 Hours
Detection: Seismic, heat, light. Optional: Removal or opening detector
Indications: Three colored LEDs
Operating Temp: -35º to +70º C (-31 to 145º F)
Humidity: 90%
Enclosure: Metal
Dimensions: 150 X 110 X 60 mm (5.90 X 4.33 X 2.36″)
