SesMo CLI outdoor detector

SesMo CLI outdoor detector

SesMo CLI outdoor detector incorporates single detection
Advanced outdoor seismic detector
Designed for building outdoor protection
Used to ptotect heavy metal gates
Contains consequently single alarm relay output
The SesMo CLI detects mechnical visrations as well as heating
Used for outdoor walls, pipes, floors certainly for ceilings break-in protection
Modern generation of professional burglar detector
For complete protection add Av-Gad tropical alarm panels
Housed in sealed IP-66 plastic case
Supplied also with selaed gland for cablkes entry
By applying unique signal analyzing the SesMo prevents false alarms
ASIC Micro controller analyzes the detected signals
Alarm is activated for short while (momentary)
Precise electronic filters prevent false alarms due to environmental disturbance

Main Features
Enclosed in sealed IP-66 with light tunnel cover enclosure
Concealed wires terminal
High immunity to false alarms
Low Standby current consumption only 25 mA
Used in yachts and water factories
Easy and fast installation

Technical
Seismic sensor: Bimorph
Heat sensor: Semiconductor (min. 75 °C, 167 ° F)
Processor: Digital ASIC
Testing simulators: None
Applications: Outdoor and Indoor
Operating Voltage: 11 to 14V DC
Current: 25 mA @ standby, 14 mA alarm
Relay: (1) N.C. mode, solid state, 50 mA @ 12V
RFI Protection: 30V/m @ 10–1000 MHz
EMI Protection: 50KV @ 1 mS lightning or surge
Tamper: Optional
MTBF: 18,000 Hours
Detection: Seismic
Indications: (1) LED
Operating Temp: -35º to +70º C (-4 to 158º F)
Humidity: 85%
Enclosure: Plastic at IP-66
Dimensions: W=87, L=156, H=63 mm (3.42 x 6.15 x 2.48″)