SesMo 3D Shock & Displacement

SesMo 3D Shock & Displacement

SesMo 3D Shock & Displacement and Heat detector
Incorporates three detection technologies
Displacement detector in triple axis (X, Y, Z)
Detects Seismic (break and shock), objects movement in addition heat detector
Designed to protect openings of fuel/water storage underground tanks
Triple Tech detector: Seismic, displacement and heat
Detect displacement in three axis
Advanced outdoor also indoor seismic detector
Main used for underground hatch protection
Required for instance for outdoor hatch at fuel, water, gas stations protection
Used for outdoor walls, floors and ceilings break-in protection
Powered by 12V, or optional 24V
Unique signal analyzer therefore prevents false alarms
ASIC analyzes the detected signals
Supplied with three alarm output relays
Alarm is activated as soon as one of the three sensors is activated
Each sub-detector has an identification and targeting LED light
Includes an Opto (non-magnetic) relay for each sub-detector
Enclosed in IP-66 plastic case

Main Features
Unique high security detector
Concealed wires terminal
High immunity to false alarms
Low Standby current consumption
Used in fuel & water factories
Indication LEDs
Easy and fast installation

Technical
Operating Voltage: 11 to 14V DC
Current: 25 mA @ standby, 14 mA alarm
Seismic sensor: Bimorph
Displacement sensor: Triple axis (X, Y, Z) +/- 16 gram
Heat sensor: Semiconductor (min. 75 °C, 167 ° F)
Processor: Digital ASIC
Wiring: Eight cores cable via gland
Relays: (3) N.C. mode, Opto solid state, 50 mA @ 12V
RFI Protection: 30V/m @ 10–1000 MHz
EMI Protection: 50KV @ 1 mS lightning or surge
Programming: DIP switch (8)
MTBF: 14,000 Hours
Detection: Seismic, Displacement, Heat
Utility: Tool to set zero-point (3D Sensor) at a remote location
Indications: Colored LEDs (4)
Ingress protection: IP-66
Enclosure: Plastic with sealing rubber
Temperature range: -35ºC to +70 ºC (-31 ~ 145º F)
Dimensions: 141 x 80 x 52 mm (5.55 x 3.15 x 2.05”)