SesMo IP-65 detector outdoor

SesMo IP-65 detector outdoor

SesMo IP-65 model is an advanced outdoor seismic detector
Main used for safe and vault, walls and ATM protection
SesMo IP-65 with single alarm relay output
Incorporates two detection technologies into one detector: Seismic and Heat.
SesMo most used for primary protection of bank or mercantile safe and vault
Used for outdoor walls, floors and ceilings break-in protection
SesMo represents the most modern generation of professional burglar detector
The SesMo IP-65 is designed for outdoor applications
Housed in Poly Carbonate plastic case
12V operating power and relay output
By applying unique signal analyzing the SesMo prevents false alarms
SesMo IP-65 dual tech (2 detectors) providing protection in wide burglary methods
ASIC Micro controller analyzes the detected signals
Alarm is activated as soon as one of the two sensors is activated
Precise electronic filters prevent false alarms due to environmental disturbance

Main Features

Enclosed in sealed IP-65 enclosure
Concealed wires terminal
High immunity to false alarms
Low Standby current consumption only 25 mA
Tamper protection
Separate sensitivity and enable/disable for each detection technology
Two Indication LEDs
Easy and fast installation

Technical

Seismic sensor: Bimorph
Heat sensor: Semiconductor (min. 75 °C, 167 ° F)
Light sensor: None
Processor: Digital ASIC
Testing simulators: None
Applications: Indoor
Operating Voltage: 11 to 14V DC
Current: 25 mA @ standby, 50 mA alarm
Relay: (1) N.C. mode, solid state, 50 mA @ 12V
RFI Protection: 30V/m @ 10–1000 MHz
EMI Protection: 50KV @ 1 mS lightning or surge
Tamper: Single Tamper Switch; case opening
MTBF: 30,000 Hours
Detection: (2) Seismic, heat
Indications: Two colored LEDs
Operating Temp: -35ºC to +70 ºC (-31 ~ 145º F)
Humidity: 80%
Enclosure: Poly Carbonate, Gray color
Dimensions: 117 X 87 X 50 mm (4.60 X 3.42 X 1.97″)