SSR Electronic Relay 25 amp trig by 3-32V
Solid state relay module for switching AC voltage
Switching module for 24-380V AC voltage
Switch by low voltage 3-32V
AC voltage switch with a 12 volt DC voltage control
Quality model with approvals
When trig command apply LED lights up
Few models for from 10-80 amperes load
Electronic relay without moving parts
Electronic SSR relay for 25 amperes
Acts like a dry contact switch
Solid State Electronic Relay
Relay with low power consumption and low input current
Suitable for operation from transistor voltage output
Powered by logical output in alarm and fire alarms
Protected against electrical interference
Connects wires with screw and insulation cable for each contact
Used for switching lighting, shutter motor, machine engine
Works like a circuit breaker when apply low voltage at input
Main Features
High power relay without moving parts
New ultra compact design
Installer-Friendly device
Build-in EMI protection
Easy and fast wiring, only 4 wires
Technical
Control Voltage Range: 3 to 32 volts DC
Operating current: 20 to 50 mA direct current
Switching voltage: 24 to 380 volts AC
Maximum Load Current: 25A @ 24-380V
In isolation between input and output: 2000 AC volts
Relay: Electronic SSR switch
Installation: On a metallic surface
Indication: LED light
Relay contacts: MOSFET
Relay Configuration: One touch, short on startup
Protection: Internal. Inductive load switching requires additional protection
Connectors: Screws terminal block
Case: Metallic with plastic cover
Operating Humidity: 80% none condensing max relative humidity
Operating Temperature: -10 to +80ºC (+14 to +176ºF)
Dimensions: 58 x 45 x 23 mm height